DiaCAL (c) MOPS Computer GmbH *Dongle Emulator (Dongle Crack) for Aladdin Hardlock*

DiaCal: Grayscale calibration

With the DiaCal software, you are able to manually or densitometrically calibrate the colors and brightness of your CCG/AGFA/Matrix film recorder. The Look-up Table (LUT) of the film recorder correspondingly changed. The LUT can be stored as a file and reloaded. It is also possible to export it in the CCF file format from RasterPlus® (produced by Graphx, Inc. USA) and in IMAGE Assist® for MAC from McLain Imaging USA.

There are two possible calibrations for the film recorder.

* With the densitometric calibration, the values are determined with the help of a transmitted-light densitometer and entered into the program. The new LUT is then calculated, saved and transmitted to the film recorder.
* With the manual calibration you have the option of using the mouse to change the LUT (presented graphically as a curve). This altered LUT can also be saves and transmitted to the film recorder.

In principle, the results of both calibrated and uncalibrated LUTs can be checked by exposing a test picture (with grayscales as test fields). Additionally, a protocol of the calibration status is part of each test picture.

Different color densitometers can be connected online via a serial interface, in order to have the test values automatically carried over into the value table.

A log file protocols all actions which affect the film recorder.


Requirements:

* IBM compatible PC with at least an 80386 processor, Windows95® or Windows NT® 4.0
* Film recorder from CCG/Agfa/Matrix.
* A GPIB card (IEEE-488, NI compatible) or SCSI card (ASPI compatible), however with Windows drivers to connect the film recorder
* For the densitometric calibration you need a transmitted-light densitometer.
* For the manual calibration you need a trained eye.